131R5906112 /15 UDX
Tip: If the desired wireless network is not in the list or hidden by default, select Other network. A
form will pop up, allowing you to fill in the details of the network.
Image 10–17 Example of the entry form to search for other wireless networks
5. If required by the chosen wireless network fill in the user name, password and confirm.
Tip: If you already connected to this network in the past using this projector, the software will
remember the user name and password, ensuring you do not have to fill this in again.
6. Press Connect to connect to the selected network.
7. If required by the chosen wireless network, fill in the user name and password and confirm.
An automatic IP address is assigned.
When connected to this network, it is indicated in the upper right corner of the menu with the term
“connected”.
How to manually set up the IP address
1. In the main menu, select Settings → Communication → WiFi.
Image 10–18 Communication menu, WiFi
The WiFi menu is displayed.
GUI – System Settings
To Next Page
Loading...
Need help?
General
