Select there the right application, e.g. the “Barionet extension addressing
tool” and unzip it on your PC.
Per default is the IO-tunnel application loaded on the Barionet which
supports one R6 unit.
5.3 Loading BCL application to Barionet
To load a BCL application to your Barionet select the in the package
contained file “Barionetbcl.cob” and upload it to web area “WEB4” (case
sensitive) of your Barionet.
At this point there is a difference for the Barionet50 and the Barionet100.
For the Barionet50 you can use the web update function (sub page
“Advanced update”).
BARIX AG | 17. Oct. 2013 | Barionet Hands-on Training Guide | Page 27/38
To Next Page
Loading...