page 30page 30
page 30page 30
page 30
930/937 Mulcher (O)
800-00256
ENGINE AND TRANSMISSION PARAMETERSENGINE AND TRANSMISSION PARAMETERS
ENGINE AND TRANSMISSION PARAMETERSENGINE AND TRANSMISSION PARAMETERS
ENGINE AND TRANSMISSION PARAMETERS
The following are some of the engine and transmission parameters which may be displayed in standard or metric
units as well as in English, Spanish, French, Italian, or German languages (when applicable, consult engine or
transmission manufacturer for SAE J1939 supported parameters):
· Engine RPM · Engine hours
· System voltage · Percent engine load at the current RPM
· Coolant temperature · Oil pressure
· Fuel economy · Throttle position
· Engine manifold air temperature · Current fuel consumption
· Transmission oil pressure · Transmission oil temperature
· Transmission gear position · Engine configuration parameters
· Active fault codes · Stored fault codes
NAVIGATION AND KEYPAD FUNCTIONSNAVIGATION AND KEYPAD FUNCTIONS
NAVIGATION AND KEYPAD FUNCTIONSNAVIGATION AND KEYPAD FUNCTIONS
NAVIGATION AND KEYPAD FUNCTIONS
The keypad on the PowerView display is a capacitive touch sensing system. There are no mechanical switches to
wear or stick. When a key is touched, feedback is provided by the screen flashing. The keys on the keypad
perform the following functions:
Menu – Enter or exit menu screens.
Left Arrow – Scroll the screen or move the
parameter selection to the left or upward.
Right Arrow – Scroll the screen and move
the parameter selection to the right or
downward.
Enter Key – Select a menu or parameter or
hide/view an active fault code.
Faceplate Features
MURPHY POWER VIEW OPERATION CONTINUED...
To Next Page
Loading...
