page 5page 5
page 5page 5
page 5
930/937 Mulcher (O)
800-00256
INTRODUCTIONINTRODUCTION
INTRODUCTIONINTRODUCTION
INTRODUCTION
Your Barko Mulcher has been designed and manufactured with high quality materials and care in workmanship. This
manual is intended as a permanent reference to aid professional operator's in their work, and should be available for
use at any time. If the machine is not equipped with this manual, ask your supervisor to obtain one for you.
Understand the correct servicing procedures before servicing the machine. It is important to know the correct
operating and servicing procedures of the mulcher and all safety precautions to prevent the possibility of property
damage and/or personal injury or death.
As a professional, trained operator, you are responsible for safety, both your own and that of your co-workers. Your
knowledge and use of all safety practices and correct servicing procedures in this manual, and your good judgement,
can be a major factor in preventing some of the thousands of injuries and deaths caused by industrial accidents each
year.
A professional operator should also be familiar with the information contained in other applicable sources such as
American National Standards, SAE, OSHA, etc.
ADDITIONAL INFORMATION:
Logging Safety Resource Guide (APA, 95-A-1) is available from the American Pulpwood Association. This guide lists
sources of videotapes, slide programs, movies, and publications on various aspects of logging safety.
DON'T FORGET - SAFETY FIRST! DON'T FORGET - SAFETY FIRST!
DON'T FORGET - SAFETY FIRST! DON'T FORGET - SAFETY FIRST!
DON'T FORGET - SAFETY FIRST!
Mulcher
Model No.
Serial No.
Engine
Model No.
Serial No.
The Mulcher serial number plate is located on the front
frame assembly.
NOTE:NOTE:
NOTE:NOTE:
NOTE: Information in this manual is current at the time of printing. Barko Hydraulics reserves the right to
make changes and improvements to it's products and manuals at any time without notice or
obligation.
REFERENCEREFERENCE
REFERENCEREFERENCE
REFERENCE
INFORMATIONINFORMATION
INFORMATIONINFORMATION
INFORMATION
All requests for information, service or spare parts should
include loader serial number. For more information
contact:
Barko Hydraulics,LLC
One Banks Avenue
Duluth, MN 55816
Phone: 715-395-6700
Fax: 715-392-3931
Website: www.barko.com
Email: barko@barko.com
To Next Page
Loading...
