Barko Hydraulics 930 - Service Schedule Details

page 61page 61
page 61page 61
page 61
930/937 Mulcher (O)
800-00256
SERVICE SCHEDULESERVICE SCHEDULE
SERVICE SCHEDULESERVICE SCHEDULE
SERVICE SCHEDULE
Engine Air Cleaner Engine Air Cleaner
Engine Air Cleaner Engine Air Cleaner
Engine Air Cleaner -
Inspect for cracks, loose clamps, or
other damage. Inspect dust cup for dust - empty if needed. Check
restriction of Air Cleaner daily - replace filter as needed.
8 hours8 hours
8 hours8 hours
8 hours
DailyDaily
DailyDaily
Daily
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIREDSERVICE REQUIRED
SERVICE REQUIRED
Fan and DrivebeltsFan and Drivebelts
Fan and DrivebeltsFan and Drivebelts
Fan and Drivebelts - Check for looseness and wear.
Tighten or replace as needed.
Fuel Tank Fuel Tank
Fuel Tank Fuel Tank
Fuel Tank - Check level and fill if necessary.
Engine Crankcase Oil Engine Crankcase Oil
Engine Crankcase Oil Engine Crankcase Oil
Engine Crankcase Oil - Check level.
Engine RadiatorEngine Radiator
Engine RadiatorEngine Radiator
Engine Radiator - Check coolant level and fill if
necessary. Inspect exterior for dirt and debris and
clean if necessary.
Hydraulic ReservoirHydraulic Reservoir
Hydraulic ReservoirHydraulic Reservoir
Hydraulic Reservoir - check level and quality of oil.
50 hours50 hours
50 hours50 hours
50 hours
WeeklyWeekly
WeeklyWeekly
Weekly
100 hours100 hours
100 hours100 hours
100 hours
MonthlyMonthly
MonthlyMonthly
Monthly
400 hours400 hours
400 hours400 hours
400 hours
2 Months2 Months
2 Months2 Months
2 Months
1000 hrs1000 hrs
1000 hrs1000 hrs
1000 hrs
6 Months6 Months
6 Months6 Months
6 Months
YearlyYearly
YearlyYearly
Yearly
Axle Wheel Retainer Cap Screws or Stud Nuts -Axle Wheel Retainer Cap Screws or Stud Nuts -
Axle Wheel Retainer Cap Screws or Stud Nuts -Axle Wheel Retainer Cap Screws or Stud Nuts -
Axle Wheel Retainer Cap Screws or Stud Nuts -
after first 10 hours, check and tighten to proper
torque value if needed.
Hoses, Connections, Cylinders Hoses, Connections, Cylinders
Hoses, Connections, Cylinders Hoses, Connections, Cylinders
Hoses, Connections, Cylinders - Inspect for leaks
and damage. Tighten, repair, or replace parts if
necessary.
Operator's PlatformOperator's Platform
Operator's PlatformOperator's Platform
Operator's Platform - Clean area of debris, tools,
rags, water, ice, and snow.
FittingsFittings
FittingsFittings
Fittings - Lubricate as shown on Lubrication Points.
Use a multi-purpose grease.
Bolts/Nuts Bolts/Nuts
Bolts/Nuts Bolts/Nuts
Bolts/Nuts - Visually inspect for wear or damage.
Axle Wheel Retainer Cap Screws or StudAxle Wheel Retainer Cap Screws or Stud
Axle Wheel Retainer Cap Screws or StudAxle Wheel Retainer Cap Screws or Stud
Axle Wheel Retainer Cap Screws or Stud
Nuts -Nuts -
Nuts -Nuts -
Nuts -
after first 50 hours, check and tighten to proper
torque value if needed.
Engine Air Cleaner FilterEngine Air Cleaner Filter
Engine Air Cleaner FilterEngine Air Cleaner Filter
Engine Air Cleaner Filter - Check restriction
indicator daily. See notes below.
Engine ShroudingEngine Shrouding
Engine ShroudingEngine Shrouding
Engine Shrouding - Clean and inspect.
Safety treads, safety signs, seat beltSafety treads, safety signs, seat belt
Safety treads, safety signs, seat beltSafety treads, safety signs, seat belt
Safety treads, safety signs, seat belt - Check for
damaged or missing items and replace.
Bolts/NutsBolts/Nuts
Bolts/NutsBolts/Nuts
Bolts/Nuts - Check for proper torque every 50 hours.
Retorque if necessary.
-Your Barko built machine is available with various engine options. These engines are equipped with a restriction
indicator provided by the engine manufacturer. Barko recommends that you consult the Operators manual provided
by the engine manufacture for recommendations on air cleaner element change intervals.
Barko also recommends that you consult your Operators manual provided by the engine manufacturer to ensure
that filter elements other than the ones provided by the engine manufacturer have been tested and meet there
qualifications.
**
**
*
**
**
*
**
**
*