page 51page 51
page 51page 51
page 51
930/937 Mulcher (O)
800-00256
START-UP PROCEDURE CONTINUED...
OPERATING INSTRUCTIONS AND PRECAUTIONS CONTINUED...OPERATING INSTRUCTIONS AND PRECAUTIONS CONTINUED...
OPERATING INSTRUCTIONS AND PRECAUTIONS CONTINUED...OPERATING INSTRUCTIONS AND PRECAUTIONS CONTINUED...
OPERATING INSTRUCTIONS AND PRECAUTIONS CONTINUED...
- Determine the possibility of hidden obstacles in the
mulcher path and set up the mulcher float level
(elevation) to accomodate it.
Use the float override button (on the right joystick) to raise
the mulcher head manually if needed (this overrides
the elevation set by the Mulcher Float Level Knob).
Once you let go of the button, the mulcher head begins
to fall back down.
- When working on a steep slope, do not move across
the slope. Work up and down the slope in a vertical
pattern only to avoid any chance of tipping.
Also, steepness of terrain may not allow machine to
slow to a stop as fast as it does on level ground when
travel pedal is released. Use extra caution on steep
terrain.
See Mulcher Manual for more operating instructions and safety warningsSee Mulcher Manual for more operating instructions and safety warnings
See Mulcher Manual for more operating instructions and safety warningsSee Mulcher Manual for more operating instructions and safety warnings
See Mulcher Manual for more operating instructions and safety warnings
particular to each attachment.particular to each attachment.
particular to each attachment.particular to each attachment.
particular to each attachment.
To Next Page
