Barko Hydraulics 930 - Page 68

page 68page 68
page 68page 68
page 68
930/937 Mulcher (O)
800-00256
FLUID SPECIFICATIONS CONTINUED...
FUEL STORAGEFUEL STORAGE
FUEL STORAGEFUEL STORAGE
FUEL STORAGE
NOTE: NOTE:
NOTE: NOTE:
NOTE: Diesel fuels stored for a long time may form gum or bacteria and plug filters.
Keep fuel in a clean container and store in a protected area. Water and sediment must be removed before fuel gets to
the engine. Do not use de-icers to remove water from fuel. Do not depend on fuel filters to remove water.
NOTE: NOTE:
NOTE: NOTE:
NOTE: Keep all dirt, scale, water, or other foreign material out of fuel.
Store fuel drums on sides with plug up.
ALTERNATIVE LUBRICANTSALTERNATIVE LUBRICANTS
ALTERNATIVE LUBRICANTSALTERNATIVE LUBRICANTS
ALTERNATIVE LUBRICANTS
Conditions in certain geographical areas may require special lubricants and lubrication practices which do not appear
in this manual.
LUBRICANT STORAGELUBRICANT STORAGE
LUBRICANT STORAGELUBRICANT STORAGE
LUBRICANT STORAGE
The machine can operate at top efficiency only if clean lubricants are used. Use a clean container to handle all
lubricants. Store them in an area protected from dust, moisture, and other contaminants. Store drums on sides.
WARNING WARNING
WARNING WARNING
WARNING
Diesel fuel or hydraulic fluid under pressure can penetrate the skin or eyes.Diesel fuel or hydraulic fluid under pressure can penetrate the skin or eyes.
Diesel fuel or hydraulic fluid under pressure can penetrate the skin or eyes.Diesel fuel or hydraulic fluid under pressure can penetrate the skin or eyes.
Diesel fuel or hydraulic fluid under pressure can penetrate the skin or eyes.
Fluid leaks under pressure may not be visible. Use a piece of cardboard orFluid leaks under pressure may not be visible. Use a piece of cardboard or
Fluid leaks under pressure may not be visible. Use a piece of cardboard orFluid leaks under pressure may not be visible. Use a piece of cardboard or
Fluid leaks under pressure may not be visible. Use a piece of cardboard or
wood to find leaks but do not use bare hand. Wear safety goggles. If fluidwood to find leaks but do not use bare hand. Wear safety goggles. If fluid
wood to find leaks but do not use bare hand. Wear safety goggles. If fluidwood to find leaks but do not use bare hand. Wear safety goggles. If fluid
wood to find leaks but do not use bare hand. Wear safety goggles. If fluid
enters skin or eyes, get immediate medical attention.enters skin or eyes, get immediate medical attention.
enters skin or eyes, get immediate medical attention.enters skin or eyes, get immediate medical attention.
enters skin or eyes, get immediate medical attention.
ENGINE COOLANTENGINE COOLANT
ENGINE COOLANTENGINE COOLANT
ENGINE COOLANT
Engine coolant supplied from the factory meets or exceeds engine manufacturer specifications. Please see the
engine manufacturer's manual to determine correct coolant and mixture, (ambient temperature dependent), when
servicing the radiator.
Current cooling system capacities are:
930 Cummins 305HP approx. 7 gallons
937 Cummins 365HP approx. 8 gallons