Delivery mode
19
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
Successful registration also corresponds to the start of a tour. The driver-ID will be included in the tour
journal. The tour will end when you switch to the "Start screen/main menu" window. If a change in driver
is detected during a tour, the current tour will end and a new one will start. During a break, for example,
you can also switch off the controller system via the "Special functions" window without leaving the tour.
The "Tour" window or the "Order details" window will appear, depending on the
"Display default data" parameter. (See also Section 4.2).
In the case of a double delivery from the master/slave, the tour/shift of the slave
base module also ends when the master shift ends.
Automatic language change
When the automatic language change is activated and the device language differs from the driver's
language determined during the registration, a language change will be suggested to the operator.
If the language is changed, the system restarts automatically.
Controller Parameters/Auto. switch language)
To Next Page
Loading...
