Bartec PETRODAT 3003 - Delivery with Additive Blending

Delivery mode
22
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
It may be necessary to edit order fields (e.g. parking position), depending on the
configuration.
You can configure the appearance of the "Order" window so that the "State" line is displayed instead of
the "Product" line for scheduled orders. The content of this line is transferred with the order details and
cannot be edited.
(Configuration:
Sequence Controls Menu/ Dialog Parameters/View of scheduled data)
The flight-ID cannot be changed in planned orders
When there is a "master/slave" double delivery, and "AS" operator, only transaction
types R1 and TU are permitted on the slave base module.
4.3.1 Delivery with additive blending
The additive product must have been configured. If the order involves the delivery of an additive product,
confirm the scheduled data as usual.
(Configuration:
Sequence Controls Menu/Additive Product Configuration)
To select the additive product manually, open the product selection window and confirm the product.