Delivery mode
18
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
4.1.3 Shift dialog: TAG
For the shift start or the driver registration the RFID TAG must be used. To do this, the operator/driver
must hold the RFID TAG in front of the TAG reader. The system uses the pre-installed driver database
to check the validity of the RFID TAG. If the login is successful, the ID of the operator (in the "Tour"
window) and the "Confirmation" softkey will appear on the display.
A fuel-filling order can now be accepted and carried out or special functions can be implemented.
Each order and call-up of the special function menu must be preceded by a registration.
If the operator is on the start screen while the driver is registered, then the software will automatically
switch to the next window.
To Next Page
Loading...
