Bartec PETRODAT 3003 - Starting and Performing Refuelling

Delivery mode
30
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
Automatic meter selection is deactivated by jumping back and the operator can select the meter
manually.
Selecting a meter according to input for the lower wing/upper wing interlock function
is only available with an "AS" operator.
4.6 Start fuel-filling
In the "Start delivery" window, the operator must start fuel-filling with the "Start" button. The status in the
office remains at "I'm in position" until fuel-filling has started.
Enable automatic pump
If Enable automatic pump is active, fuel-filling starts immediately after the meter has been selected.
(Configuration:
Sequence Controls Menu/Meter Controls Parameters/Fuelling autostart)