Safety precautions
6
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
2 Safety precautions
The operator of the system is responsible for observing all the regulations in force for the storage,
transportation and loading/unloading of combustible liquids.
For safe installation and commissioning, the knowledge of the safety instructions and warnings in this
service manual and their strict compliance are essential.
Careful handling and consistent adherence to instructions can help to prevent accidents, injuries and
property damage.
Regulations and provisions lose none of their validity when the system is operated with PETRO 3003
units.
PETRO 3003 units are built with due consideration to the regulations currently in force and left the
factory in perfect condition. Their installation and maintenance are to be entrusted to properly trained
specialists only.
Make sure that the data and operating conditions specified by BARTEC BENKE are observed.
Follow the instructions for operating and servicing the units.
If you discover any signs of damage or breakage on any parts of the system or if the system’s
safe operation cannot be guaranteed for any other reason, do not start the system or, if already
in operation, shut down the system immediately.
Notify your maintenance department.
Get in touch with our service specialists if you discover any faults or defects during operation
or if you have cause to doubt that the units are working properly.
PETRO 3003 units are not a replacement for a tanker vehicle’s safety equipment or for a user’s
own safety measures (e.g. overfill protection).
The measuring system may only be operated for applications that are subject to legal
metrological control in the respective EU member state if the nominal operating conditions
specified in the EU type examination certificate are met.
To Next Page
Loading...
