System monitoring
72
Aircraft Refuelling, Operating Instructions, BA 090323, (07.03.2022)
If you request help with an error from your service centre, you must enter the five numbers that are
displayed at the bottom right of the Events window. These help the service centre to pinpoint the error.
Maybe in the event display more than one error are displayed.
Use the arrow-keys to select the individual messages. So you can note all corresponding error codes.
If the seal switch is open, the event display does not appear for 20 seconds if an error occurs. In this
case, you must open the event display manually.
If an error occurs which prohibits a calibrated or
compensated measurement, the delivery can
only take place as an uncalibrated or
uncompensated delivery.
If an error occurs which prohibits a measured
delivery, the pump will be disabled. The delivery
must be finished.
To Next Page
Loading...
