2UM-16-012
THANK YOU FOR YOUR PURCHASE
OF THIS PRODUCT.
BASE Engineering Inc. strives to continuously improve its products and
services. Customer feedback is an important part of this process. If you
have suggestions for the improvement of this product, this document or the
services we provide, we would like to hear from you.
506.635.2280
800.924.1010
sales@baseng.com
BASE Engineering Inc.
600 Rothesay Ave.
Saint John NB E2H 2H1
Canada
DIRECT LOCAL
TOLL FREE
506.635.2281
FAX
Steve A. Belyea
President, BASE Engineering Inc.
WARNING: The receiver/relay enclosure unit is NOT approved
for use in hazardous locations. Installation must be carried out
by a qualified electrician for all AC systems, in a non-hazardous
zone well removed from any explosive or dangerous gas
supply, piping, hoses or valve fittings.
FCC Rules and Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
i. This device may not cause harmful interference, and
ii. This device must accept any interference received, including
interference that may cause undesired operation.
FCC Part 15.231
To Next Page
Loading...