7
UM-16-012
HANDHELD OVERVIEW
This manual is intended to guide the user through the many operations of the
ProControl 3 handheld.
The handheld unit is designed to IP67
standards for a robust, custom designed
ergonomic unit.
Its 12 function buttons double as an
alphanumeric keyboard and provide positive
tactile feedback when operated.
Navigation buttons are used to guide you
through the various software menus. The
function of the 3 navigation buttons will be
mode/menu specific and displayed directly
above the button.
Additional user feedback is provided
through the use of an audible buzzer and
vibrations.
The ProControl 3 handheld can be equipped
with Direct Sequence Spread (DSS) radio
technology at an operating frequency of
2.4Ghz, or a Frequency Hopping Spread
Spectrum (FHS) radio technology at an
operating frequency of 900MHz for
optimal range and performance.
The ProControl 3 is powered by a
rechargeable lithium ion battery for up to
12 hours of continuous use, includes low
battery indicator. The charging cradle is
used to charge and secure the handheld
while vehicle is in motion.
The handheld and receiver are pre-
programmed to operate as a paired system
unless otherwise requested.
Replacement handhelds can be quickly field
programmed by following the instructions in
the section System Pairing (Dedication).
To Next Page
Loading...