AW00118508000 Specifications, Requirements, and Precautions
Basler racer Camera Link 4
Lens Adapter Universal camera front, suitable for lens mount adapters with the following lens
mounts: C-mount (2k cameras), F-mount, M42x0.75-mount (FBD 16 mm),
M42x1.0-mount (FBD 16 mm), M42x1.0-mount (FBD 45.56 mm), M58x0.75-
mount (FBD 20 mm).
Lens adapter must be ordered separately as an accessory. See Section 1.7.4
on page 17 for information about selecting a suitable lens adapter for your
camera.
Size
(L x W x H)
33.77 mm x 56 mm x 62 mm (without lens adapter or connectors)
48.48 mm x 56 mm x 62 mm (with C-mount lens adapter and connectors)
77.57 mm x 56 mm x 62 mm (with F-mount lens adapter and connectors)
47.07 mm x 56 mm x 62 mm (with M42-mount lens adapter and connectors)
76.66 mm x 56 mm x 62 mm (with M42-mount FBD 45.56 mm lens adapter and
connectors)
51.07 mm x 56 mm x 62 mm (with M58-mount lens adapter and connectors)
Weight ≈ 210 g (typical) without lens adapter
≈ 240 g (typical) with C-mount lens adapter and connectors
≈ 300 g (typical) with F-mount lens adapter and connectors
≈ 230 g (typical) with M42-mount lens adapter and connectors
≈ 280 g (typical) with M42-mount FBD 45.56 lens adapter and connectors
≈ 240 g (typical) with M58-mount lens adapter and connectors
Conformity CE (includes RoHS), FCC, UL Listed, GenICam, Camera Link, IP30, REACH
The CE Conformity Declaration is available on the Basler website:
www.baslerweb.com
Software Basler pylon Camera Software Suite (version 4.0 or higher)
Available for Windows, Linux x86, Linux ARM, and OS X
Specification raL2048-80km raL4096-80km
Table 1: General Specifications - 2k and 4k Mono Cameras
To Next Page
Loading...
Need help?
General
