Basler racer User Manual

AW00118508000 Physical Interface
Basler racer Camera Link 46
5.5.1.3 Selecting an Input Line as a Source Signal for a Camera
Function
You can select an input line as the source signal for the Line Start Trigger.
Note that to use an input line as the source signal for a camera function, you must apply a signal to
the input line that is appropriately timed for the function.
For detailed information about selecting an input line as the source signal for the camera’s Line Start
Trigger function, see Section 6.1 on page 55.
Default Input Line Selection
Line CC1 is selected as the source signal for the camera’s Line Start Trigger function.

Basler racer Specifications

General

Brand	Basler
Model	racer
Category	Digital Camera
Language	English