Basler racer User Manual

AW00118508000 Specifications, Requirements, and Precautions
Basler racer Camera Link 22
1.11.3 Imaging Sensor Over Temperature Condition
The camera has imaging sensor over temperature protection. If the temperature of the
camera’s imaging sensor rises above 75° C, an over temperature condition will be detected and
the circuitry for the imaging sensor will switch off. In this situation, you will still be able to
communicate with the camera but the camera will no longer acquire images.
Provide the necessary cooling when this situation arises. After the imaging sensor circuitry has
sufficiently cooled bring the camera back to normal operation by either action:
 Carry out a camera restart by switching power off and on again or
 Carry out a camera reset as described in Section 9.1 on page 147.

Basler racer Specifications

General

Brand	Basler
Model	racer
Category	Digital Camera
Language	English