AW00118508000 Specifications, Requirements, and Precautions
Basler racer Camera Link 1
1 Specifications, Requirements,
and Precautions
This chapter lists the camera models covered by the manual. It provides the general specifications
for those models and the basic requirements for using them.
This chapter also includes specific precautions that you should keep in mind when using the
cameras. Basler strongly recommends that you read and follow the precautions.
1.1 Intended Use
Basler digital cameras for machine vision are designed exclusively for indoor professional image
capture. Temperature and humidity requirements apply as detailed in Section 1.11 on page 21. All
relevant product documentation must be observed, including directions for correct camera use.
The cameras must not be used for the following:
Purposes and installations requiring special camera certification other than mentioned in this
documentation.
Purposes and installations requiring specific design and precautions for use under harsh
conditions.
If in doubt whether a specific camera is compatible with certain operating conditions and uses,
contact your sales representative.
To Next Page
Loading...
Need help?
General
