Instruction Manual Breathing Air Compressors
51
6. REPAIR INSTRUCTIONS
GENERAL
Preventive maintenance usually involves replacing the valves,
gaskets and sealing rings as well as carrying out the mainten
ance work.
Repair work can be carried out on the compressor block to
a certain extent but a certain experience and skill is necess
ary. It should be noted, however, that
- no repair should be carried out on the crankdrive nor on
the bearings
- safety valves are not repaired but always replaced com
pletely.
For all further repair instructions refer to
applicable workshop manual.
To Next Page
Loading...
