Instruction Manual Breathing Air Compressors
31
FILLING VALVE MAINTENANCE
To protect filling valve against contamination a sintered
metal filter is screwed in the filling valve body.
- Unscrew pressure gauge from filling valve body.
- Screw off sintered metal filter with a suitable screw driver.
- To clean filter element, the best method is to use hot
soapy water and to blow dry with compressed air. Re
place if heavily soiled.
- Screw in filter element,.
- Seal pressure gauge with PTFE tape or Loctite 243 and
screw in tight to desired position.
To Next Page
Loading...
