Bauer VARIUS - Torque Settings; Couples de Serrage

Torque settings
During inspections fixings must
be tightened to correct torque setting.
Please observe the following:
Thread size
torque setting
M6
10 Nm/7.3 lb.*ft.
MB
25 Nm/18.0 lb.*ft.
(10 Nm~ 1 kpm)
Tightening order:
Tighten the valve head fixing equally and in cross-
wise order, observing the above torque
settings.
B
Couples de serrage
Au cours des controles, veiller a ce que les vis soient
serrees
au couple correct.
Appliquer les valeurs suivantes:
Filet
M6
MB
Couple de serrage
10 Nm
25Nm
(10 Nm r::. 1 m kg)
(10 Nm !::. 1 kpm)
Ordre de serrage:
Serrer les vis de la tete de soupape regulierement et
en croix, tout en respectant les couples de
serrage mentionnes ci-dessus.