Table of contents Syscompact 2000 M pro
/ 98 822-175-2
5 Transportation ........................................................................................... 31
5.1 Packaging .......................................................................................... 31
5.2 Ensure the following when transporting ............................................. 31
5.3 Transporting the system manually ..................................................... 31
5.4 Transporting the system in vehicles .................................................. 32
5.5 Shipping the system ........................................................................... 32
6 Commissioning .......................................................................................... 33
6.1 Checks to perform before commissioning ......................................... 33
6.1.1 TDR measurement on live cables with the IRG 2000 as
an independent device ......................................................... 33
6.2 Ensuring there is no voltage at the work place .................................. 33
6.3 Preparing the test object terminals .................................................... 34
6.4 Setting up the system ........................................................................ 34
6.4.1 Placing the system in the road traffic area ........................... 34
6.5 Connect the high-voltage connection cable to the test object. .......... 35
6.5.1 Safety instructions for connecting the system ..................... 35
6.5.2 Connecting ........................................................................... 35
6.6 Connecting the TDR connection cable to the test object
(IRG 2000) ......................................................................................... 37
6.6.1 Safety instructions for connecting the IRG 2000 to the
live cable .............................................................................. 37
6.6.2 Connecting ........................................................................... 38
6.7 Connecting the system to the supply voltage .................................... 39
6.8 Securing the test area ........................................................................ 39
6.9 Switching on the system .................................................................... 40
7 Switching off the system in the event of an emergency ....................... 41
8 Using the IRG 2000 as an independent device ....................................... 42
8.1 Removing the IRG 2000 from the system.......................................... 42
8.2 Placing the IRG 2000 into the system ............................................... 42
9 Configuring and operating the IRG 2000 ................................................. 43
9.1 Turning on the IRG 2000 ................................................................... 43
9.2 Selecting the language ...................................................................... 43
9.3 Setting the date and time ................................................................... 43
9.4 Adjusting the colours of the display elements ................................... 44
9.5 Selecting the system of units ............................................................. 44
9.6 Evaluating reflection images with cursors.......................................... 44
9.6.1 Setting cursors ..................................................................... 44
9.6.2 Positioning the zero cursor .................................................. 45
9.7 Saving measurement data ................................................................. 45
To Next Page
Loading...