Syscompact 2000 M pro Table of contents
822-175-2 v / 98
9.8 Printing measurement data ................................................................ 45
10 Configuring and operating the system .................................................... 46
10.1 Selecting the language ...................................................................... 46
10.2 Setting the date .................................................................................. 46
10.3 Setting the time .................................................................................. 47
10.4 Setting the contrast of the display ...................................................... 47
10.5 Setting the brightness of the indicator lights ...................................... 47
10.6 Displaying system information ........................................................... 48
10.7 Switching the high voltage on and off ................................................ 48
11 Cable testing .............................................................................................. 49
11.1 About cable testing ............................................................................ 49
11.2 Setting the test parameters on the system control panel .................. 49
11.3 Performing the cable test ................................................................... 50
11.3.1 Safety instructions for cable testing ..................................... 50
11.3.2 Prerequisites ........................................................................ 50
11.3.3 Procedure ............................................................................. 51
12 Cable fault pre-location ............................................................................. 52
12.1 Safety instructions for cable fault location ......................................... 52
12.2 Setting the general pre-location parameters on the IRG 2000 .......... 52
12.3 TDR: Time Domain Reflectometry ..................................................... 53
12.3.1 About the TDR method ........................................................ 53
12.3.2 Available TDR methods ....................................................... 54
12.3.3 Setting TDR parameters ...................................................... 54
12.3.4 Performing the TDR measurement ...................................... 55
12.3.5 Evaluating TDR reflection images ........................................ 56
12.4 SIM/MIM: Secondary-Multiple Impulse Method ................................. 59
12.4.1 About the SIM/MIM method ................................................. 59
12.4.2 Setting SIM/MIM parameters ............................................... 60
12.4.3 Performing the SIM/MIM measurement ............................... 61
12.4.4 Evaluating SIM/MIM reflection images................................. 62
12.5 ICM: Impulse current method ............................................................ 64
12.5.1 About the ICM method ......................................................... 64
12.5.2 Setting ICM parameters ....................................................... 66
12.5.3 Performing ICM measurements ........................................... 67
12.5.4 Evaluating the ICM transient image ..................................... 69
13 Acoustic pin-pointing ................................................................................ 72
13.1 About acoustic pin-pointing ................................................................ 72
13.2 Setting parameters for the acoustic pin-pointing ............................... 72
To Next Page
Loading...