Baur Sys compact 2000 M pro - Page 95

Syscompact 2000 M pro Index
822-175-2 95 / 98
Removing the IRG 2000 from the
system • 42
Replacing the rechargeable batteries
of the IRG 2000 • 85
S
Safety devices • 25
Safety instructions for cable fault
location • 52
Safety instructions for cable testing •
50
Safety instructions for connecting the
IRG 2000 to the live cable • 37
Safety instructions for connecting the
system • 35
Safety instructions for
decommissioning • 75
Safety instructions for maintenance
work • 79
Safety instructions for repair work • 87
Safety instructions for the system’s
surge mode • 73
Safety locking feature against
unauthorised operation • 16
Saving measurement data • 45, 59,
63, 71
Screened cable with 1 phase • 36, 38
Screened cable with 3 phases • 36,
38
Securing the test area • 39
Selecting the language • 43, 46
Selecting the system of units • 44
Setting cursors • 44
Setting ICM parameters • 66
Setting parameters for the acoustic
pin-pointing • 72
Setting SIM/MIM parameters • 60
Setting TDR parameters • 54
Setting the brightness of the indicator
lights • 47
Setting the contrast of the display • 47
Setting the date • 46
Setting the date and time • 43
Setting the general pre-location
parameters on the IRG 2000 • 52
Setting the test parameters on the
system control panel • 49
Setting the time • 47
Setting up the system • 34
Shipping the system • 32
SIM/MIM
Secondary-Multiple Impulse Method •
59
Special personal protective
equipment • 17
Standard delivery • 90
Storage • 89
Structure of safety instructions • 7
Switching off the system in the event
of an emergency • 41
Switching on the system • 40
Switching the high voltage on and off •
48
System control panel • 20
T
Taking the system out of operation •
78
TDR
Time Domain Reflectometry • 53
TDR measurement on live cables • 15
TDR measurement on live cables with
the IRG 2000 as an independent
device • 33
Technical data • 29
Testing the discharge unit • 82
Transportation • 31
Transporting the system in vehicles •
32
Transporting the system manually •
31
Turning on the IRG 2000 • 43
U
Unscreened cable with 3 phases • 37,
39