To Next PageTo Next PageHow to fix no flame on Baxi Boiler?
If your Baxi Boiler is not igniting ('no flame' error), check that the flame sensing electrode is in good condition and correctly positioned. Also, check the wire is uninterrupted and makes good contact with the flame sensing electrode and the ignition switch.
What to do if pressure is too low in Baxi DUO-TEC MAX+?
If the pressure in the hydraulic circuit of your Baxi Boiler is too low, and the pressure in the CH circuit is less than 0.5 bar, perform filling. Also, check that the hydraulic pressure switch works correctly.
Provides critical safety instructions regarding gas, fumes, and flammable materials.
Offers advice on optimizing boiler performance and reducing energy consumption through temperature settings.
Explains how to set the desired flow temperatures for central heating (CH) and domestic hot water (DHW).
Describes the different operating modes available for the boiler, such as DHW only or heating only.
Lists the items included in the boiler's packaging.
Provides technical drawings and specifications for boiler dimensions and connection points.
Details the installation of concentric flue ducts, including length limitations and bending rules.
Describes the installation of separate flue and air ducts using an accessory splitting kit.
Guides on how to connect a room thermostat to the boiler's terminal block.
Introduces optional accessories that can be connected, such as external sensors and zone systems.
Provides a detailed procedure for the first-time ignition and gas recognition process of the boiler.
Describes the function used to remove air from the heating circuit after installation or maintenance.
Explains how to activate the chimney sweep function for maximum heating power adjustment.
Details how to perform combustion tests and check CO₂ levels for optimal boiler operation.
Explains the pre-heat function that improves hot water comfort by providing instant hot water.
Outlines the process for converting the boiler from natural gas to LPG and vice-versa by an authorized service.
Details how to adjust the maximum heating power using parameter P13 to match system requirements.
Focuses on the hydraulic unit, including water treatment advice and filter cleaning.
Provides specific instructions and diagrams for correctly positioning the ignition and flame sensing electrodes.
Lists components that require performing the automatic calibration procedure after replacement.
General| Type | Combi |
|---|---|
| Mounting | Wall-mounted |
| ErP Heating | A |
| ErP Water | A |
| NOx Class | 5 |
| Output Range | 24kW |
| Weight | 36.5 kg |
| Fuel Type | Natural Gas |
| Hot Water Flow Rate | 16.4 l/min |
