Baxi POWER HT+ Series User Manual

3. Select the Time central heating CH1 menu by turning the button.
Important
For heating circuits 2 and 3, select the parameters Time central
heating CH2
or Time setting 3/CHP.
For the domestic hot water circuit, select the parameter Time
hot water.
4. Confirm the menu selection by pressing the button.
The parameter Select days (500, 520, 540 or 560) appears.
5. Confirm the menu selection by pressing the button.
The current selection flashes.
6. Select a weekly interval.
7. Confirm the menu selection by pressing the button.
8. Select the parameter 1st Time ON (501, 521, 541 or 561) by turning
the button.
9. Confirm the menu selection by pressing the button.
The beginning of the first time range flashes.
10. Select the end of the first time range by turning the button.
Important
Select the value --:-- in order not to program a first time range.
11. Confirm the value programmed by pressing the button.
Fig.126
MW-3000071-EN-03
MENU
---------------------------------------------------
-
Information
Set time and date
Fig.127
MW-3000133-EN-02
MENU
Mon - Sun
Time central heatin
g
CH1
Select da
y
s
Fig.128
MW-3000134-EN-02
MENU
06:00
Time central heatin
g
CH1
Mon - Sun: 1st Time ON
Fig.129
MW-3000135-EN-02
MENU
06:00
Time central heatin
g
CH1
Mon - Sun: 1st Time ON
10 Settings
100 POWER HT + 7702630 - v02 - 11082018

Baxi POWER HT+ Series Specifications

General

Model	POWER HT+ Series
Category	Boiler
Installation Type	Wall-mounted
Heat Exchanger Material	Stainless Steel
Warranty	2 years
Fuel Type	Natural Gas
Control System	Integrated Control
Ignition Type	Electronic