CAMP/MG208/20-0006 AK 98 Independent Home Dialysis System 10
4. Connect the blue dialyzer connector to the dialyzer. Turn the
dialyzer blue end up.
5. Introduce the blood line into the venous clamp (marked with a
blue dot).
Pull the bloodline lightly downwards.
6. Attach the venous pressure transducer to the pressure
connector by turning clockwise to secure the connection.
7. Clamp the lines on the top of the venous drip chamber.
Single Needle: Tilt the expansion chamber holder backwards
until it clicks into position.
Lining the machine – Venous line - cont’d
To Next Page
Loading...
Need help?
General
