CAMP/MG208/20-0006 AK 98 Independent Home Dialysis System 30
9. To empty dialyzer, remove the blue outlet dialysis fluid tube from
the dialyzer and attach it to the standby port of the machine.
The emptying process will start automatically.
10. When the dialyzer has been emptied, remove the red inlet
dialysis fluid tube from the dialyzer and attach it to the standby
port of the machine as well.
11. Connect the acid concentrate connector to standby port.
12. Press Confirm to drain the BiCart.
13. Remove the BiCart when emptied.
Emptying the blood lines – continued
To Next Page
Loading...
