CAMP/MG208/20-0006 AK 98 Independent Home Dialysis System 7
Single Needle: Install the arterial expansion chamber at the back
of the holder (Section 5.2).
7. Connect the red dialyzer connector to the dialyzer.
8. Place the arterial blood line in the arterial blood line guide.
9. Introduce the blood line into the arterial clamp (marked with
a red dot).
Pull the blood line lightly downwards.
10. Attach the arterial pressure transducer to the pressure
connector by turning clockwise to secure the connection.
Lining the machine – Arterial line - cont’d
To Next Page
Loading...
Need help?
General
