CAMP/MG208/20-0006 AK 98 Independent Home Dialysis System 8
Preparing the saline infusion line
1. Close the roller clamp on the saline infusion line.
2. Connect the end of the infusion line into the 2
nd
infusion bag.
3. Squeeze the chamber of the infusion line until it is half full
with saline.
4. Open the roller clamp and run saline up to the arterial
pump segment.
5. Close the roller clamp and the arterial infusion line clamp as per
the instructions of the home program nurse.
6. Secure the infusion line to the arterial infusion line.
There are different infusion lines and saline bags. This is just
one example. The purpose of the infusion is to avoid
episodes of hypotension.
To Next Page
Loading...
Need help?
General
