Bay-Tek quik drop - User Manual

Questions and Answers

C
coltonshortSep 8, 2025
How to troubleshoot menu buttons not working on Bay-Tek quik drop?
- O
  ojohnsonSep 8, 2025
  If the menu buttons on your Bay-Tek Arcade Game Machine don't work, it could be due to faulty communication between the motherboard and the I/O Newgen Board. Replace the button if the problem remains with the button itself (AAPB2700). Inspect the crimp to ensure a good connection. Check the connections from the menu buttons to the I/O Newgen Board using cables # AAPB2700 and CE5820. Refer to the Communication Error Troubleshooting section. If the issue persists, replace the I/O Newgen Board with Part # AANEWGEN1-PJ/RBN.
J
Justin SmithSep 10, 2025
What to do if low tickets message appears on Bay-Tek quik drop Arcade Game Machines?
- C
  Christina RoySep 10, 2025
  If you see a 'Low Tickets' message on the monitor of your Bay-Tek Arcade Game Machine, load tickets into the tray. Ensure the tickets hold down the micro switch wire. Check the connectors from the low ticket switches to the Newgen board for continuity, using Cables # CE5818 or CE5822. Inspect the switch and replace it if needed (AASW200). If problems persist, replace the I/O Newgen Board with Part # AANEWGEN1-PJ/RBN.
K
Kimberly WashingtonSep 12, 2025
What to do if monitor is not working on Bay-Tek quik drop?
- M
  Mark StoneSep 12, 2025
  If the monitor on your Bay-Tek Arcade Game Machine isn't working, power it down, wait 5 minutes, and then power it up again. Ensure the power is plugged into the back of the monitor and down to the power strip, checking all power cords (A5CORD5, A5SP4100, and A5CORD1). If this doesn't resolve the issue, replace the monitor (A5MO3200).
A
Alvin KempSep 13, 2025
How to fix no sound on Bay-Tek quik drop Arcade Game Machines?
- R
  Raymond YoungSep 14, 2025
  To troubleshoot no sound on your Bay-Tek Arcade Game Machine, enter the Main Menu and verify that the Game Volume & Attract Volume are not set to zero and that Mute is set to Disabled. Check the connections and reseat the audio cable from the motherboard to the speakers, referring to the wiring diagram and using Cables # A5CEAU010, A5CE2300, CE5828, CE5825, AACE8811. Unplug the audio cable (A5CE2300) from the motherboard and plug it into an MP3 player or phone to see if music is amplified and comes out of the speaker. If yes, the motherboard is faulty; if no, the cable or amplifier board is faulty. Replace the speaker if necessary (AACE8811).
C
Cassandra WilliamsSep 15, 2025
How to troubleshoot bad ball score sensor on Bay-Tek quik drop?
- R
  Ryan WestSep 15, 2025
  When dealing with a bad ball score sensor in your Bay-Tek Arcade Game Machine, ensure there are 12 volts on the orange and green wires for power. The signal wires should have 3.3 volts on the white and green wires when the sensor is clear, and 0 volts when blocked. Refer to the wiring diagram and check the connections from the sensor to the Newgen Board, using Cables CE5816 & CE5822. If the issue persists, replace the Sensor Board with # AACB3404A.
C
Christina BrownSep 18, 2025
How to troubleshoot bad ball count sensor on Bay-Tek Arcade Game Machines?
- M
  Marcus MartinezSep 18, 2025
  When dealing with a bad ball count sensor in your Bay-Tek Arcade Game Machine, ensure there are 12 volts on the red and black wires for power. The signal wires should have 3.3 volts on the white and black wires when the sensor is clear and 0 volts when blocked. Refer to the wiring diagram. Check connections from the sensor to the Newgen Board using Cables CE5822. Replace the Sensor Board with # AACB3404A.