BA series pumps
Pump unit with diesel drive 1401
8.14
Operation
Engine oil
Qualified are all trademark oils which fulfil at least one of the following specifications:
ACEA - B2 / E2 or more significant API - CD / CE / CF / CF-4 / CG-4 or more significant
If engine oil of a poorer quality is used, reduce oil change intervals to 150 hours of operation.
Oil viscosity
– Choose a viscosity according to the ambient
temperatures where the engine is to be started from
cold.
– The engine must be in a horizontal position before
adding oil or checking the oil level.
– Pull out dipstick „1“ and add engine oil of the correct
specification and viscosity up to the „max“ mark on the
dipstick; (Chapter 3.1)
Fuel
WARNING
Only refuel when engine is stopped.
WARNING
Never refuel close to open flames or flammable sparks, don’t smoke. Use only pure
fuel and clean replenishing cups. Don’t spill the fuel.
To Next Page
Loading...