EasyManua.ls Logo

BD Alaris GP - Specifications: Electrical, Physical, and Environmental; Electrical Safety and Compliance; Physical and Environmental Specifications

BD Alaris GP
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Alaris™ GP (Guardrails™) Volumetric Pump
Specifications
BDDF00535 Issue 1
48/56
Specifications
Electrical Protection
Class I, Type CF (Defibrillation-proof)
Electrical/Mechanical Safety
Complies with IEC/EN60601-1 and IEC/EN60601-2-24.
Electro Magnetic Compatibility (EMC)
Complies with IEC/EN60601-1-2 and IEC/EN60601-2-24.
Electrical Safety
Typical earth leakage current 78µA.
Typical Enclosure Leakage Current (Normal Condition) = 0µA
Typical Protective Earth Resistance = 32mOhms
The above measurements are for guidance only, IEC/EN60601-1 limits are defined below:
Earth Leakage Current (Normal Condition) <= 500µA
Enclosure Leakage Current (Normal Condition) <= 100µA
Protective Earth Resistance <= 200mOhms
Classification
Continuous mode of operation, Portable Equipment
AC Power Supply
100 - 230 VAC, 50 - 60Hz, 60VA (Maximum).
Fuse Type
2 X T 1.25 A, slow blowing.
Dimensions
148mm (w) x 225mm (h) x 148mm (d). Weight: approx. 2.5kg (excluding power cable).
Protection against fluid ingress
IP33 - Protected against direct sprays up to 60° from the vertical.
Environmental Specifications
Condition Operating Transport & Storage
Temperature +0°C - +40°C -20°C - +50°C
Humidity 20% - 90%* 15% - 95%*
Atmospheric Pressure 700hPa - 1060 hPa 500hPa - 1060hPa
*Non condensing.
Battery Specifications
Rechargeable NiMH (Nickel Metal Hydride). Automatically charges when the Pump is connected to AC power.
Battery Charging - 2.5 hours to 95%.
Battery Life
Infusion Rate Mean Time To Battery Empty from fully charged
25ml/h 5.8 hours
125ml/h 5.65 hours
1200ml/h 3.4 hours

Table of Contents

Related product manuals