Beckhoff EL10 Series User Manual

Product overview
EL10xx, EL11xx32 Version: 4.5
2.6.2 EL1124, EL1144, EL1134 - Technical data
Technical data EL1124 EL1144 EL1134
Number of inputs 4
Nominal voltage of inputs 5V
DC
12V
DC
48V
DC
Signal voltage "0" < 0.8V < 2.4V -3…5V
(IEC 61131-2, type 1)
Signal voltage "1" >2.4V > 8.5V 15…30V
(IEC 61131-2, type 1)
Input filter <<1µs (50ns typ.) 10µs 10µs
Input current 50µA typ. 3mA typ. 3mA typ.
(IEC 61131-2, type 1)
Current consumption power contacts typ. 14mA + load typ. 14mA + load typ. 10mA + load
Current consumption via E-bus 90mA typ.
Electrical isolation 500V (E-bus/field voltage)
Bit width in the process image 4 input bits
Configuration no address setting, configuration via TwinCAT System Manager
Weight approx. 55g
Permissible ambient temperature range
during operation
0°C ... + 55°C
Permissible ambient temperature range
during storage
-25°C ... + 85°C
Permissible relative humidity 95%, no condensation
Dimensions (W x H x D) approx. 15mm x 100mm x 70mm (width aligned: 12mm)
Mounting [}41]
on 35mm mounting rail conforms to EN 60715
Vibration/shock resistance according to EN 60068-2-6/EN 60068-2-27,
see also Installation instructions for terminals with increased mechanical load capacity
[}46]
EMC resistance burst/ESD conforms to EN 61000-6-2 / EN 61000-6-4
Protection class IP20
Installation position variable
Approval
CE, cULus [}53], ATEX [}51]

Beckhoff EL10 Series Specifications

General

Brand	Beckhoff
Model	EL10 Series
Category	Touch terminals
Language	English