Beckhoff TwinSAFE logic FB

Function blocks
122 Function blocks for TwinSAFE logic components
3.15.4 Display in TwinCAT 3
Display of the function block and its properties in TwinCAT 3.
Figure 3-66: FB Connection Shutdown in TwinCAT 3
Figure 3-67: FB Connection Shutdown properties
NOTE
Shutdown
Before a connection can be disabled, it must have started up without error and be in DATA state.
For modular machines, where a module is generally not available, for example, this concept should be
realized via additional TwinSAFE groups.