Beckhoff TwinSAFE logic FB

System description
22 Function blocks for TwinSAFE logic components
2.2.4 Function blocks info data
Info data for function blocks can be enabled in the properties of the function block.
Figure 2-11: Function block properties
The info data is shown in the I/O tree structure below the TwinSAFE logic in the process image. From
here, these signals can be linked with PLC variables.
Figure 2-12: Function block info data in the I/O tree structure
Information on state and diagnostics of the FBs can be found in the respective function block
descriptions.