GB Sound speed controller SFR-1
38 BEIER-Electronic 06.02.2019
“Parking light“, “Low beam headlight“, “High beam headlight“, “Front fog
light“ and “Rear fog light“ outputs
The outputs for these lights are switched on as soon as the corresponding function is
switched on. The function can be switched on using a proportional channel, a nautic
switch or the EKMFA-mode.
Of course, you do not have to keep to this order. That means for example if you don’t
need a rear fog light, you can connect something else to the output.
The lights can be switches with the programmable light switch under "Configuration",
"Outputs" and "Light switch" (see page 72).
Output “Reversing light”
The output for the reverse driving light is always switched on when the vehicle runs
backwards.
Output “Brake light“
The brake light is always shortly turned on when the driving speed is reduced
substantial. The sensitiveness can be configured in the Sound-Teacher (see page
70).
Outputs “Indicator left“ and “Indicator right“
The outputs for the indicators can be switched on using proportional channel #2, a
nautic switch or the EKMFA-mode.
If “American indicator mode” is selected, the indicator lights will come on, as soon as
the parking light is switched on. The intensity for the “indicator parking light” can be
adjusted in “Option 1“(e.g. 10%).
If hazard lights are switched on, both indicators will start flashing at the same time.
At Configuration Outputs Output options additional settings can be made.
Outputs "Bending light left" and "Bending light right"
These outputs can be turned on at cornering. There are 2 ways in which the bending
lights can be turned on:
1. By steering on proportional channel #2 (X2/2)
2. By the indicator signal
3. By driving backwards
For more information about these two options, please look on the page 70. The
bending lights can optionally also be front fog lights and can then also be switched
by the function "Front fog light". The switching on and off of the bending lights is not
immediate, but with a dimming function.
To Next Page
