TX-1xx Series Printer Operation Manual
~ 24 ~
line; press the key and hold will continuously feed until released.
In settings/input state, press the key to go back to previous menu or
cancel current parameter modification. Marked as "[Back]" in this
manual.
： In standby status, press the key once to enable or disable the
numbering function; Long press the key, the number can be reset to
"000"; press and hold the key more than 4 seconds, can modify the
report’s serial number; In Settings/input state, which is used to
switch to the previous setting options or increasing parameter value,
press and hold the key to quickly increase the value. Marked as
"[N/CN]" or “[UP]” in this manual.
：In standby status, press the key can choose operation modes; Long
press the key, can execute the user login / logout operation, about
the user login function, please refer to Section 8.7; In Settings /
input conditions, which is used to access to a setting item, or to
confirm the modified parameters. Marked as "[MODE]" or "[OK]"
in this manual.
To Next Page
Loading...