TX-1xx Series Printer Operation Manual
~ 35 ~
time, the time setting may be incorrect. Please set the time before use.
Note: If the printer is set with an administrator password, you need to enter the
password before setting.
⚫ In the standby interface, press and hold the [DATE] key to enter the
time setting menu. As shown below:
Press the [OK] key. If the administrator password is set, the printer will ask for
the password. After entering the correct password, the following figure will
appear:
⚫ Press [N/CN] and [DATE] to adjust the value, press [Fn1] or [Fn2]
To Next Page
Loading...