TX-1xx Series Printer Operation Manual
~ 41 ~
3. If necessary, press the [BACK] key to feed the paper.
In the Direct mode, the header and trailer can be added manually or
automatically. For information about the header and trailer, please refer to the
Section 8.2.
The automatic header and trailer functions are usually used in the following
scenarios:
⚫ The information output by the scale lacks the necessary content, such as
manufacturer information, model, S/N, signature, etc.
⚫ Add sample name / lot number and other information to the report.
⚫ Add controlled time / date and other information to the report output by the
scale.
Manually print the header and trailer:
In the "Direct mode”, press the [Fn2] key, the following list appears:
To Next Page
Loading...