Beijing TX Series - Communication Interface; Interface Definition

TX-1xx Series Printer Operation Manual
~ 80 ~
Note: When a new table is imported, the original table will be overwritten. After
the table is imported, unplug the USB data cable and restore the connection to
the scale.
⚫ Use code input method:
When you need to use the code input method, press the [Fn1] key at the standby
interface, the following list is displayed:
→ [N/CN] or [DATE] →
2.Sample Code:
Enter the code, and the header outputs the sample name corresponding to
the code.
5.Code in data:
Enter the code and output the name corresponding to the code in front of
the weighing data.