Bender ISOMETER isoEV425 User Manual

Operation of the device
36
isoEV425_D00126_09_M_XXEN/03.2019
5.5 Menu "t"
5.5.1 Time configuration
FAC = Factory setting; Cs = User settings
5.6 Menu "SEt"
5.6.1 Function configuration
FAC = Factory setting; Cs = User settings
*applies to isoEV425-D49-4
Display Setting value Description
Value range FAC Cs
t 0 … 10 0 s Start-up delay when starting the
device
ton 0 … 99 0 s Response delay K1 and K2
toff 0 … 99 0 s Delay on release K1 and K2
test
OFF/1 / 24
24 h Repetition time device test
Display Activation Setting value Description
FAC Cs
Value
range
FAC
Cs
off 0 . . . 999 0
Password for
parameter setting
nEt
on/
off*
Test of the system connec-
tion during device test
S.Ct
on
Device test during device
start
FAC Restore factory settings
SYS For Bender Service only

Bender ISOMETER isoEV425 Specifications

General

Brand	Bender
Model	ISOMETER isoEV425
Category	Measuring Instruments
Language	English