Bender ISOMETER isoEV425 User Manual

Technical data
65
isoEV425_D00126_09_M_XXEN/03.2019
10.2 Standards, approvals and certifications
The ISOMETER® has been developed in compliance with the following
standards:
 DIN EN 61557-8 (VDE 0413-8): 2015-12/Ber1: 2016-12
 IEC 61557-8 -8: 2014/COR1: 2016
Subject to change! The specified standards take into account the edition valid
until 02.2019 unless otherwise indicated.

Bender ISOMETER isoEV425 Specifications

General

Brand	Bender
Model	ISOMETER isoEV425
Category	Measuring Instruments
Language	English