Bender ISOMETER isoEV425 - Page 48

Modbus register assignment of the ISOMETER®
48
isoEV425_D00126_09_M_XXEN/03.2019
RW = Read/Write; RO = Read Only; WO = Write Only
8004 WO
Factory
setting only for
parameters reset-
table by FAC
UINT 16 --- 0x4653 "FS"
8005 WO
Start device test
UINT 16 --- 0x5445 "TE"
8006 WO
Clear fault mem-
ory
UINT 16 --- 0x434C "CL"
9800
to 9809
RO Device name
UNIT 16
(ASCII) - refer
to
Chapter 8.1.1
--- ---
9820 RO
Software
ID number
UINT 16 ---
9821 RO
Software version
number
UINT 16 ---
9822 RO
Software version:
Year
UINT 16
9823 RO
Software version:
Month
UINT 16
9824 RO
Software version:
Day
UINT 16
9825 RO
Modbus driver
version
UINT 16
Register
Property Description Format
Unit
Value range