BENDIX TABS-6 User Manual

40
ECU Part Number Label
The external part number label is located above the control
port of the module. If this label is not readable for any
reason, the Bendix part number is etched into the module
castingabovethecontrolport(SeeFigure1).ABendix
manufacturing date code is to the right of the part number
inscription.
There is an additional label under one of the covers that
showsapin-outdiagramforthe12-pinauxiliaryconnector.
FIGURE 36 ‑ LABEL INFORMATION
Production
Data
Component
ID
Final 8 Digits
Show Initial
Software
Loaded
Bendix Part Number
Knorr-Bremse
YYWWDAAAAYYWWDXXXXXXXX
K987654Vxx
X
03
Mxxx
K123456
Software Revision Level
ThenumberoftheinitialsoftwareloadedontheECUis
also indicated. The current software revision number can
be read using a diagnostic tool.
Document Revision Level
Please visit Bendix.com to ensure you have the latest
version of this document.
BW2726©2013BendixCommercialVehicleSystemsLLC,amemberoftheKnorr-BremseGroup•AllRightsReserved•6/13
Log-on and Learn from the Best
On-line training that's available when you are — 24/7/365.
Visit www.brake-school.com.

BENDIX TABS-6 Specifications

General

Type	Trailer ABS Module
Operating Temperature Range	-40°C to +85°C
Protection Rating	IP67
Category	Automobile Accessories
Voltage	12V/24V
Communication	J1587/J1939
Mounting	Frame Mount
Manufacturer	BENDIX
System Type	ABS
Number of Channels	4S/2M