H
Santa Paula, CA USA
www.bendpak.com
MODEL NUMBER
DESCRIPTION
LIFT CAPACITY
SERIAL NUMBER
UPC
VOLTAGE
DANGER!
Disconnect Power
Before Servicing
PN 5905950
110-120V, 50-60 Hz, 1 Ph
380-415V, 50-60 Hz, 3 Ph
208-240V, 50-60 Hz, 1 Ph
208-440V, 50-60 Hz, 3 Ph
DATE CODE
WARRANTY VOID IF DATA PLATE IS REMOVED
MADE IN CHINA
G
P/N 5905177
Place on BOTH Posts
2-Post Red Cylinder.pdf:
Size: 3"W x 1.75"H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No Gloss)
Print Process: Offset Lithography - 200 line-screen
or 300 p.p.i. for digital
Lamination: Clear Laminate non-glare medium
matte over laminate for abrasion, chemical, and
ultra violet protection.
P/N 5905950
2020_Serial_Tag-A-5905950.pdf:
Size: 3"W x 3"H
Material: 2 Mil. Gloss polyester thermal transfer
label with a high performance permanent acrylic
adhesive.
Ink: 1 Color-Black
I J
ALI_Notice_Label.jpg
Size: 3"W x 1.75"H
(Order Labels from ALI)
P/N 5905377
P/N 5905414
TO RAISE LIFT:
1. Press and hold UP button.
2. When lift is just PAST desired
height, release UP button.
3. Hold down Lowering Handle.
DO NOT hold down Safety Lock
Release Handle.
Lift engages on safety locks.
4. Release Lowering Handle.
1. Press and hold UP button for
two to three seconds, moving
lift off safety locks.
2. Hold down Safety Lock Release
Handle and Lowering Handle.
3. When lift is fully lowered,
release both handles.
TO LOWER LIFT:
PN 5905414
2-Post_Lock-Release_Label.pdf:
Size: 4"W x 2"H
Material: White Vinyl Pressure Sensitive Adhesive
Thickness: 4 Mil
Ink: U.V. protected CMYK 2/C Process
Finish: Matte Overlaminate (No Gloss)
Print Process: Offset Lithography - 200 line-screen or 300 p.p.i. for digital
Lamination: Clear Laminate non-glare medium matte over laminate for abrasion, chemi-
cal, and ultra violet protection.
XPR Series Models (Non-ALI) Product Decal Positioning
To Next Page
Loading...
Need help?
General
