XPR Series Models (Non-ALI) Powerside Views
C
Safety Instructions: If attachments, accessories, or conguration-modifying components that are
located in the load path affect oper ation of the lift, af fect the lift elec trical listing, or af fect intended
vehicle accommodation are used o n this lift and, if they ar e not certied for u se on this lift, then th e
certication of this lift shall b ecome null and void. Co ntact the partic ipant for informatio n pertaining
to certied attachments, accessories, or conguration-modifying components.
BendPak lifts are supplied with concrete fast eners meeting the c riteria as prescr ibed by ASTM E488/
E488M-18. Lift buyers are responsible fo r any special regio nal, structural, a nd/or seismic an choring
requirements specied by any othe r agencies and/or co des such as the Unifor m Building Code (UBC)
and/or International Building Code (IBC).
The manufacture, use, sale, or impo rt of this product may b e subject to one or more U nited States
patents, or pending application s, owned by BendPak Inc.
1645 Lemonwood Dr.
Santa Paula, CA USA
www.BendPak.com
LIFT TYPE: Surface Mount MANUFACTURER: BendPak. See data plate for prod uct details
POWER: Electric/Hydraulic INSTALLATION:
See manual or contact factory
Do Not Remove Engineered by BendPak Inc., USA Made in China
PN 5905940
Santa Paula, CA USA
www.bendpak.com
MODEL NUMBER
LIFT CAPACITY
SERIAL NUMBER
DESCRIPTION
VOLTAGE
DANGER!
Disconnect Power
Before Servicing
WARRANTY VOID IF DATA PLATE IS REMOVED
PN 5905950
110-240VAC, 50-60 Hz, 1 Ph 380-415VAC, 50-60 Hz, 3 Ph
208-240VAC, 50-60 Hz, 1 Ph 208-440VAC, 50-60 Hz, 3 Ph
DATE OF MFG.
H
E
24"
70"
P/N 5905311
1645 Lemonwood Drive
Santa Paula, CA 93060
U.S.A.
(805) 933-9970
www.bendpak.com
ABOVE-GROUND LIFTS
P/N 5905311
1645 Lemonwood Drive
Santa Paula, CA 93060
U.S.A.
(805) 933-9970
www.bendpak.com
ABOVE-GROUND LIFTS
FRONT OF
POWERSIDE POST
BACK OF
POWERSIDE POST
B
D
I
24"
A
Place 70" from ground
to bottom of Decal
F
To Previous Page
Loading...
Need help?
General
