83
EN
MAIN CONTROLS
KEY
The bike is supplied with four keys for:
- opening the fuel cap
- steering lock
- ignition
- opening the saddle
IGNITION BLOCK
The key block, in the centre of the vehi-
cle, has two main functions:
“
“ The engine and lights can func-
tion.
The key cannot be removed.
“
“ The engine and lights cannot
function.
The key can be removed.
STEERING LOCK
Lock the steering and remove the key
while parked to prevent any unauthor-
ised use of the vehicle.
Locking
1) Turn the handlebar completely to the
left.
2) Insert the key in the ignition.
3) Turn the key anticlockwise,
in the “ “ position to lock the steer-
ing.
NOTE:
To make it easier to engage the steering
lock, move the handlebar slightly while
turning the key.
4) Remove the key.
IMPORTANT:
After locking, try turning the handlebar
slightly to make sure that the steering is
actually locked.
IMPORTANT:
Always keep duplicate keys separately
from the bike
IMPORTANT:
Never turn the ignition switch in position
while travelling, as this can cause acci-
dents.
It is advisable to apply an anti-freeze
for locks when the temperature reaches
around °0 to prevent the lock protection
hole from freezing.
To Next Page
Loading...
