EasyManua.ls Logo

Benelli BN302 - CHECKS BEFORE RIDING; Fluid Level Checks

Benelli BN302
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
87
EN
CHECKS BEFORE RIDING
It is a god idea to get used to making
a quick inspection of the vehicle before
riding it.
This daily inspection, as well as being
essential for safety, may also prevent
damage to the vehicle.
If you nd any anomalies, contact a
Benelli assistance service as soon as
possible.
ENGINE OIL CHECKS
While the engine is cold, keep the vehi-
cle upright .
Use the gauge to make sure that the oil
level is between the maximum and mini-
mum as shown in the gure.
If the level is near to the minimum, top up
CHECKS BEFORE RIDING
the oil as described in the section “Top-
ping up the engine oil”. We recommend
using Petronas Power Speed 4T oil
IMPORTANT NOTICE:
Take care against burns and scalds dur-
ing this check.
Never exceed the maximum level.
Too much oil can cause malfunctions
and damage to the engine.
The oil level reading will be incorrect
if the vehicle is parked on an uneven
surface or if the engine is hot.
The owner is responsible for making
regular checks o the engine oil and
for topping up as needed. Normal oil
consumption will lead to a lack of oil
in the engine, even if services are
carried out regularly.
Topping up engine oil
1) While the engine is cold, keep the ve-
hicle upright.
2) Turn the cap “A” counter clockwise
and remove it.
3) Add oil until it reaches a level be-
tween the minimum and maximum
limits.
4) Insert the cap “A” and tighten it by
turning it clockwise. Clean off any oil
residues.
MAX
MIN
A
INDICE
CHECKS BEFORE RIDING
EN
91

Table of Contents

Related product manuals